|Place of Origin:||China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Exporting standard(wooden box packing).|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 Set|
|Aopt Tire Size:||≤1200mm||Service Life:||≥10 Years|
|Oerating Workers:||2-5 Worker||Output Rubber Powder Size:||20-80mesh|
|Type:||Waste Tire From Rubber Powder||Warranty:||One Year|
|Waste Tyre Recycling Machine:||Semi-Automatic / Full Automatic||Structure:||Horizontal|
Waste Tire Recycling Mchine Processing Production Line With Rubber Block
20 years' experience in Automatic Waste Tire Production Line
Delivery in time
Long life time
1. Tire Cutter: To cut off the inner steel rings of tires.
2. Tire Crusher: To crush tires into blocks of 500mm or so. Crushed blocks are sent back to
the crushing room through a filter system for re-crushing. Standard blocks will be filtered through
round wire mesh during the process.
3. Intermediate Rubber Crusher: To smash rubber blocks into rubber granules with size from 5
to 10 meshes.
4. Magnetic Selector: To separate steel wire from the rubber grains. Rubber granules under
5. Fine Rubber Crusher: To smash 6-12mm rubber granules into 1-3mm rubber granules under
6. Double--grinding-pan Rubber Grinder: To grind 5-10 mesh rubber granules into 40-120 mesh
7. Air-current Sorting Machine: To create air eddy and separate rubber granules and the nylon
fiber then to sort the rubber powder into two kinds: Rough fine ones ranging from 40-120 meshes.
8. Quantified Bag Filler: To fill rubber powder into the bag according to customer need.
this machine has the structure compact, advance technology, low powder consumption, high
efficiency, crushing room with offstructure. Easy to maintenance etc. The machine adopting
excellent hard alloy steel as it blade, highly hard and wearable is druable; circle mesh screen
has grindding structure, dropping pieces with large area is good for the rubber pieces.
The line is complete automatic line, from drawing out bead wires, crushing the whole tyre, separating
the thin steel and fiber to the rubber powder, The line is recycling the waste tyre under the normal temperature
Our tire recycling line is designed to make rubber powders.
And this kind of tire can be applied to:
1. Auto industry (vibration absorbing materials, shock absorber)
2. Rubber products (safety cushion, road isolation barrier, rubber tube, rubber plate, rubber sole
and so on)
3. Athletic sports ground surface materials (court, prefabricated rubber running track)
4. Road engineering and bituminous road mad surfacing (to be mixed with asphalt and be used for
surfacing roads or sleeper of railway, underground railway and so on)
5. Building materials (rubber tile rubber floor brick, water proof coil, vibration proof foundation
applied in construction and so on)
6. Agricultural use (pavement of stock farm and son)
1. This machine integrate the waste tire wire cutting and extracting machine, which reduces the
cot and enhances the efficiency greatly!
2. Dopts hydraulic reciprocating extracting method, full circle or half circle ofbead wire can be
3. Feedig oil by Duplex Impeller Pump with low operating noise, the two pumps willsupply oil at
the same time when the Extracting Cylinder reach out, and only onepump supplies oil when
hauling back the bead wire, so as to reduce the dynamo's loading current and save energy.
4. The speed and pressure of the Extracting Cylinder will not change when the Pressing
Cylinder is working, so as to enhance the machine's efficiency and extendthe Control Valve's
5. Operations are interchangeable between manual and automatic.Our Waste Tire Recyling
Plant can make rubber powder of 30-80 mesh from waste tire, also, we can collect the scrap
wire efficiently, also we have devices to collect and filter the scrap and waste gas so that we
can process the waste tire environmentally.
And we can customize this plant according to customer's requirements, such as the capacity,
the size of rubber powder or rubber particle.